EMC Cat5 isolation

Cabling-Design.com FREE cabling and networking Helpdesk
icon
 Question by Graham Jones posted 29 Mar 2001
 EMC Cat5 isolation
Do you have any recommendations about the minimum separation distance between Cat5 cable and mains power on order to minimise the effect of EMC on the network?

Is there researct to support your recommendations?

Is it acceptable to lay Cat5 cables in the same duct as mains?
icon
 Answer by Roman Kitaev posted 29 Mar 2001
Hello, Graham!

We have an good e-book titled "Guide to Separation of Network Cabling from EMI sources".

It's available at http://www.cabling-design.com/resources/documents/

Best regards
Roman Kitaev

Click here to see the expert's profile
Back to the current page of questions | Back to all the questions
Back to Cabling-Design.com HELPDESK | Ask your question
Residential Cabling Guide

Home Cabling Guide

Finally, an instantly downloadable book that saves you thousands in home improvement dollars! Enjoy living in 21st century technology-advanced home while increasing its selling value and competitive advantage on the real estate market. Whether your cabling is for home office or high-tech leisure, you can wire your home yourself or learn "wirish" to speak with your cabling contractors in their language!

Learn more ...

Please rate this page

Rating: Average rating: Ratings
BadFineGoodVery GoodExcellent