soldering lan cables (Cat7)

Cabling-Design.com FREE cabling and networking Helpdesk

Question by Anonymous visitor posted 28 Apr 2000
icon soldering lan cables (Cat7)
Hi,
I have a 3 peices Category 7 cable, i was able to get only 2 RJ45 Female
plugs, and i want to connect the 3 segments into one cable, can i solder
them together?

Please help.
Thanks in advance

Answer by Dmitri Abaimov posted 28 Apr 2000
icon Soldering those conductors without making them thicker at the point of soldering, without replacing insulation with some material that vendor doesn't want to see inside it's cable, soldering those two ALUMINUM foil screens all 360 degrees around, soldering those drain conductors, restoring that conductive sheath? Oh man! What a tricky job you plan!
Please suggest another option.
With best regards,
Dmitri Abaimov, RCDD

Click here to see the expert's profile
Back to Cabling-Design.com HELPDESK | Ask your question
Residential Cabling Guide

Home Cabling Guide

Finally, an instantly downloadable book that saves you thousands in home improvement dollars! Enjoy living in 21st century technology-advanced home while increasing its selling value and competitive advantage on the real estate market. Whether your cabling is for home office or high-tech leisure, you can wire your home yourself or learn "wirish" to speak with your cabling contractors in their language!

Learn more ...

Please rate this page

Rating: Average rating: Ratings
BadFineGoodVery GoodExcellent