USB to RJ45

Cabling-Design.com FREE cabling and networking Helpdesk
icon
 Question by Jeremiah Michno posted 08 Feb 2006
 USB to RJ45
I am trying to use an existing USB cable, cutting off the PC end of the cable, and attach a RJ45 connecter. Is there a standard pinout for this? If so what is it. This is not for ehternet... I have a device that is looking for the USB device, but looking on the RJ45 port. Similar to a Cisco console cable.
icon
 Answer by Joseph Golan posted 09 Feb 2006
Dear Jeremiah,

There is no standard pinout for what you are describing.

Sincerely,
Joseph Golan, RCDD

Click here to see the expert's profile
Back to the current page of questions | Back to all the questions
Back to Cabling-Design.com HELPDESK | Ask your question
Residential Cabling Guide

Home Cabling Guide

Finally, an instantly downloadable book that saves you thousands in home improvement dollars! Enjoy living in 21st century technology-advanced home while increasing its selling value and competitive advantage on the real estate market. Whether your cabling is for home office or high-tech leisure, you can wire your home yourself or learn "wirish" to speak with your cabling contractors in their language!

Learn more ...

Please rate this page

Rating: Average rating: Ratings
BadFineGoodVery GoodExcellent