Pulling Cable

Cabling-Design.com FREE cabling and networking Helpdesk
 Question by Randy Gulak posted 04 Sep 2000
 Pulling Cable
What are some industry tricks to pulling multiple utp runs in a ceiling space. If you have several drop off points is it best to pull groups then pull one at a time or is there a specific way to do it?
 Answer by Roman Kitaev posted 05 Sep 2000
Hi, Randy!

Here is a short overview of procedure of pulling UTP cables in open ceilings:

1) Route the pull string through the ceiling area
2) Attach the string to the cable (tape the pull string to the lead end of the cable)
3) Lift the cables and place them in the cable supports
4) Pull cables carefully avoiding snags and sharp objects

Best regards
Roman Kitaev, RCDD

Click here to see the expert's profile
Back to the current page of questions | Back to all the questions
Back to Cabling-Design.com HELPDESK | Ask your question
Residential Cabling Guide

Home Cabling Guide

Finally, an instantly downloadable book that saves you thousands in home improvement dollars! Enjoy living in 21st century technology-advanced home while increasing its selling value and competitive advantage on the real estate market. Whether your cabling is for home office or high-tech leisure, you can wire your home yourself or learn "wirish" to speak with your cabling contractors in their language!

Learn more ...

Please rate this page

Rating: Average rating: Ratings
BadFineGoodVery GoodExcellent