Cat 6 connectors

Cabling-Design.com FREE cabling and networking Helpdesk
icon
 Question by Dan Levy posted 25 Sep 2002
 Cat 6 connectors
Can someone please tell me the color code for making Cat 6 patch cables (the order the wires go into the RJ45 connector)??
icon
 Answer by Dmitri Abaimov posted 26 Sep 2002
Dear Dan ,

In this case CAT6 is not different from CAT5. Use the same pin layout from here: T568A/B.
If you are making straight-through cable, use T568A on one end and T568A on another.
If you are making cross-over cable, use T568A on one end and T568B on another.

Sincerely,
Dmitri Abaimov, RCDD

Click here to see the expert's profile
Back to the current page of questions | Back to all the questions
Back to Cabling-Design.com HELPDESK | Ask your question
Residential Cabling Guide

Home Cabling Guide

Finally, an instantly downloadable book that saves you thousands in home improvement dollars! Enjoy living in 21st century technology-advanced home while increasing its selling value and competitive advantage on the real estate market. Whether your cabling is for home office or high-tech leisure, you can wire your home yourself or learn "wirish" to speak with your cabling contractors in their language!

Learn more ...

Please rate this page

Rating: Average rating: Ratings
BadFineGoodVery GoodExcellent