interface

Cabling-Design.com FREE cabling and networking Helpdesk
icon
 Question by sree vidhya posted 24 May 2002
 interface
I've a micro-controller which is used to control some switches. This micro-controller has to receive commands from a LAN card so that any pc on the network can issue commands. Pl. tell me how to connect LAN card & microcontroller or what interface is to be used to do so?
Thanx
icon
 Answer by Dmitri Abaimov posted 27 Jun 2002
Dear Sree,

It will be very unsafe to guess on the type of connection here, because there is a chance that this connection is not of a standard type. However, if you're pretty sure this is an Ethernet connection, you can just use cross-over cord as if you would be connecting two PCs together.

Sincerely,
Dmitri Abaimov, RCDD

Click here to see the expert's profile
Back to the current page of questions | Back to all the questions
Back to Cabling-Design.com HELPDESK | Ask your question
Residential Cabling Guide

Home Cabling Guide

Finally, an instantly downloadable book that saves you thousands in home improvement dollars! Enjoy living in 21st century technology-advanced home while increasing its selling value and competitive advantage on the real estate market. Whether your cabling is for home office or high-tech leisure, you can wire your home yourself or learn "wirish" to speak with your cabling contractors in their language!

Learn more ...

Please rate this page

Rating: Average rating: Ratings
BadFineGoodVery GoodExcellent