Consolidation Point

Cabling-Design.com FREE cabling and networking Helpdesk
icon
 Question by Bruce Ikert192.88.212.43 posted 30 Nov 2006
 Consolidation Point
Can someone direct me to a standard that allows a consolidation point, in a structured cabling system, without degrading the performance level of the cable being used.
icon
 Answer by Joseph Golan posted 30 Nov 2006
Dear Bruce,
Not sure if you are looking for the standard covering consolidation points or for a manufacturer of one that complies.

The standard is covered in TIA/EIA-568-B.2.

Can you also be clearer by what you are concerned about"degrading the performance". Aproperly installed Consolidation Point should have little or no effect on performance standards.


Sincerely,
Joseph Golan, RCDD

Click here to see the expert's profile
Back to the current page of questions | Back to all the questions
Back to Cabling-Design.com HELPDESK | Ask your question
Residential Cabling Guide

Home Cabling Guide

Finally, an instantly downloadable book that saves you thousands in home improvement dollars! Enjoy living in 21st century technology-advanced home while increasing its selling value and competitive advantage on the real estate market. Whether your cabling is for home office or high-tech leisure, you can wire your home yourself or learn "wirish" to speak with your cabling contractors in their language!

Learn more ...

Please rate this page

Rating: Average rating: Ratings
BadFineGoodVery GoodExcellent