pin configuration of s-vedio to vga converter

Cabling-Design.com FREE cabling and networking Helpdesk
icon
 Question by javed fateh posted 12 Sep 2006
 pin configuration of s-vedio to vga converter
dear sir..
sir may i know any figure which contains the pin configuration of s-vedio and vga cables.i also know that which pin no.goes to the corrosponding pin no.when we convert them.
sir plz provide me further information.
thanks
icon
 Answer by Joseph Golan posted 18 Sep 2006
Dear javed,
This is more involved then just making up a cable as you will also need an electronic coinvertor to change the signal type. Look at this item from Black Box for an example of this
http://www.blackbox.com/Catalog/Detail.aspx?cid=1578,1587&mid=3978

Sincerely,
Joseph Golan, RCDD

Click here to see the expert's profile
Back to the current page of questions | Back to all the questions
Back to Cabling-Design.com HELPDESK | Ask your question
Residential Cabling Guide

Home Cabling Guide

Finally, an instantly downloadable book that saves you thousands in home improvement dollars! Enjoy living in 21st century technology-advanced home while increasing its selling value and competitive advantage on the real estate market. Whether your cabling is for home office or high-tech leisure, you can wire your home yourself or learn "wirish" to speak with your cabling contractors in their language!

Learn more ...

Please rate this page

Rating: Average rating: Ratings
BadFineGoodVery GoodExcellent