PBX into CAT6 patch panel

Cabling-Design.com FREE cabling and networking Helpdesk
icon
 Question by Dan Hield posted 17 May 2006
 PBX into CAT6 patch panel
How do I best terminate my analogue PBX (Panasonic) into my CAT6 network? I have a patch panel where all my voice and data wall sockets terminate. I then need to patch my PBX somehow into this patch panel. The PBX patch leads have one end RJ11 into the PBX and the other end unterminated with 3 core (red, green and black)wire. The system phones will connect to RJ45 wall boxes using Excel voice to RJ45 adapters. Many thanks.
icon
 Answer by Joseph Golan posted 18 May 2006
Dear Dan,
Sorry but I cannot locate information on Panasonic PBXs on the web and I am unsue what model you are refering to. It almost sounds like you are in Europe somewhere and we are in the US.

Sincerely,
Joseph Golan, RCDD

Click here to see the expert's profile
Back to the current page of questions | Back to all the questions
Back to Cabling-Design.com HELPDESK | Ask your question
Residential Cabling Guide

Home Cabling Guide

Finally, an instantly downloadable book that saves you thousands in home improvement dollars! Enjoy living in 21st century technology-advanced home while increasing its selling value and competitive advantage on the real estate market. Whether your cabling is for home office or high-tech leisure, you can wire your home yourself or learn "wirish" to speak with your cabling contractors in their language!

Learn more ...

Please rate this page

Rating: Average rating: Ratings
BadFineGoodVery GoodExcellent