Gig Crossover Cabling

Cabling-Design.com FREE cabling and networking Helpdesk
icon
 Question by Marty Taylor posted 21 Apr 2006
 Gig Crossover Cabling
What is the proper pinout for a Cat6 crossover cable?
icon
 Answer by Joseph Golan posted 21 Apr 2006
Dear Marty ,

Believe it or not that is a trick question because it does not depend on the category listing of the cable but relies on the type of service you are using as category 6 cable is suitable for Token Ring, 10BaseT, 100BaseT, 100Baset4 and 1000BaseT, each requiring their own cross over cable. Here is a link to the various cross over cable types, you can pick which one from the list:
http://www.cabling-design.com/references/pinouts/

Sincerely,
Joseph Golan, RCDD

Click here to see the expert's profile
Back to the current page of questions | Back to all the questions
Back to Cabling-Design.com HELPDESK | Ask your question
Residential Cabling Guide

Home Cabling Guide

Finally, an instantly downloadable book that saves you thousands in home improvement dollars! Enjoy living in 21st century technology-advanced home while increasing its selling value and competitive advantage on the real estate market. Whether your cabling is for home office or high-tech leisure, you can wire your home yourself or learn "wirish" to speak with your cabling contractors in their language!

Learn more ...

Please rate this page

Rating: Average rating: Ratings
BadFineGoodVery GoodExcellent