Cabling-Design.com FREE cabling and networking Helpdesk
 Question by erma luna posted 18 Feb 2006
I am trying to splice camera in to a different security system. Camera equipped with 4 pin RJ11 at end. Need to convert to 6 pin RJ11 and have it provide power. 6 pin RJ11 connects directly to system. What wires do I connect? Is power possible?
 Answer by Joseph Golan posted 18 Feb 2006
Dear erma,
There is not a standard for cameras using modular connections, you will need to contact the manufacturer for these specifics.

Joseph Golan, RCDD

Click here to see the expert's profile
Back to the current page of questions | Back to all the questions
Back to Cabling-Design.com HELPDESK | Ask your question
Residential Cabling Guide

Home Cabling Guide

Finally, an instantly downloadable book that saves you thousands in home improvement dollars! Enjoy living in 21st century technology-advanced home while increasing its selling value and competitive advantage on the real estate market. Whether your cabling is for home office or high-tech leisure, you can wire your home yourself or learn "wirish" to speak with your cabling contractors in their language!

Learn more ...