Mitel 3300 x CDR Pinout

Cabling-Design.com FREE cabling and networking Helpdesk

	Question by Doug Fowler posted 21 Dec 2005
	Mitel 3300 x CDR Pinout
Our client just installed this switch and we need to attach a serial buffer/storage device to CDR output for cost accounting software. What is the pinout? The installer said a straight through (1e pin 1 to pin 1) config but so far we still don't see any data.
	Answer by Joseph Golan posted 21 Dec 2005
Dear Doug, Sorry but I do not have any information on this switch. Typically the switch must be programed for what data is desired (incoming, outgoing and specific parameters. You will need to contact your installer for help on this. Sincerely, Joseph Golan, RCDD
Click here to see the expert's profile

Back to the current page of questions | Back to all the questions

Back to Cabling-Design.com HELPDESK | Ask your question