BNC Compression Connectors

Cabling-Design.com FREE cabling and networking Helpdesk
icon
 Question by Geno posted 28 Oct 2005
 BNC Compression Connectors
Are compression type BNC connectors for Series 59 cables comparable or even better than crimp type BNC connectors (2 crimps - Pin and Sleeve)? Assume that cost is not an issue and that these cables will be used for DS3 connections.

Thanks,

Geno
icon
 Answer by Joseph Golan posted 28 Oct 2005
Dear Geno,

I've used compression connector in place of the typical "F" but have not yet experienced the BNC version.
Based upon the F version I was quite impressed with the ease of installation and the improve resistance to pull-out.
I would go with one of the better known brands like T&B.
Like all types of these connectors there are variation based upon numerous differences in the actual cable dimensions and construction, make sure you have the proper connector and tool for your cable.

Sincerely,
Joseph Golan, RCDD

Click here to see the expert's profile
Back to the current page of questions | Back to all the questions
Back to Cabling-Design.com HELPDESK | Ask your question
Residential Cabling Guide

Home Cabling Guide

Finally, an instantly downloadable book that saves you thousands in home improvement dollars! Enjoy living in 21st century technology-advanced home while increasing its selling value and competitive advantage on the real estate market. Whether your cabling is for home office or high-tech leisure, you can wire your home yourself or learn "wirish" to speak with your cabling contractors in their language!

Learn more ...

Please rate this page

Rating: Average rating: Ratings
BadFineGoodVery GoodExcellent