Looking for a cable with RJ45 and RJ11 connectors

Cabling-Design.com FREE cabling and networking Helpdesk
icon
 Question by Doug Fisher posted 02 Sep 2005
 Looking for a cable with RJ45 and RJ11 connectors
Hello,

Can you tell me how to connect my Leviton DSL Filter Board (with RJ45 connector) to my Actiontec DSL Gateway (with RJ11 connector)?

Thanks for your help,

Doug
icon
 Answer by Joseph Golan posted 06 Sep 2005
Dear Doug,

I looked at this board on their web site at:

http://www.levitonvoicedata.com/catalog/BuildPage.aspx?BuildPageID=2521

and the instruction sheet

http://www.levitonvoicedata.com/support/documents/instructionsheets/47616DSx.pdf

You should be able to connect the DSL modem with an RJ-11 to RJ-11 cord (The one that came with the modem) which will fit into and center on the 8 pin jack on the board. The DSL line is typically on pair 1 of both types of jacks/configurations so a special cable is not required. If you want to verify this with Leviton-Telecom, they have a toll-free number 1-800-824-3005.

Sincerely,
Joseph Golan, RCDD

Click here to see the expert's profile
Back to the current page of questions | Back to all the questions
Back to Cabling-Design.com HELPDESK | Ask your question
Residential Cabling Guide

Home Cabling Guide

Finally, an instantly downloadable book that saves you thousands in home improvement dollars! Enjoy living in 21st century technology-advanced home while increasing its selling value and competitive advantage on the real estate market. Whether your cabling is for home office or high-tech leisure, you can wire your home yourself or learn "wirish" to speak with your cabling contractors in their language!

Learn more ...

Please rate this page

Rating: Average rating: Ratings
BadFineGoodVery GoodExcellent