Regd. 100MBPS Cable

Cabling-Design.com FREE cabling and networking Helpdesk
icon
 Question by Mahendra Kachhwaha posted 16 Jul 2005
 Regd. 100MBPS Cable
1. How to make the 100Mbps Ethernet cable with RJ45 connector?
2. Is any difference between 10Mbps and 100Mbps Cable?

Send with complete connection digrams
icon
 Answer by Joseph Golan posted 23 Jul 2005
Dear Mahendra,

for 10BaseT Ethernet all components must be category 3 or greater
For 100BaseT Ethernet all components must be category 5 or greater.

The connections are shown in the URL:
http://www.cabling-design.com/references/pinouts/t568ab.shtml

The connections are the same for 10 and 100BaseT

Sincerely,
Joseph Golan, RCDD

Click here to see the expert's profile
Back to the current page of questions | Back to all the questions
Back to Cabling-Design.com HELPDESK | Ask your question
Residential Cabling Guide

Home Cabling Guide

Finally, an instantly downloadable book that saves you thousands in home improvement dollars! Enjoy living in 21st century technology-advanced home while increasing its selling value and competitive advantage on the real estate market. Whether your cabling is for home office or high-tech leisure, you can wire your home yourself or learn "wirish" to speak with your cabling contractors in their language!

Learn more ...

Please rate this page

Rating: Average rating: Ratings
BadFineGoodVery GoodExcellent