Cabling-Design.com FREE cabling and networking Helpdesk
 Question by bobby nabiee posted 06 Jul 2005
we have a large network that the existing Ethernet network cabling system is reaching it maximum load.
now i need the various aspects of implementing a Gigabit Ethernet based network including the acual cabling reuired, network equipment like switches, hubs, routers , NICs etc.
thank you
 Answer by Joseph Golan posted 09 Jul 2005
Dear bobby,

For a Gigabit Ethernet system your cabling and components must be rated category 5e or higher. For a full blown system design I would suggest hiring consultant with an RCDD designation.

Joseph Golan, RCDD

Click here to see the expert's profile
Back to the current page of questions | Back to all the questions
Back to Cabling-Design.com HELPDESK | Ask your question
Residential Cabling Guide

Home Cabling Guide

Finally, an instantly downloadable book that saves you thousands in home improvement dollars! Enjoy living in 21st century technology-advanced home while increasing its selling value and competitive advantage on the real estate market. Whether your cabling is for home office or high-tech leisure, you can wire your home yourself or learn "wirish" to speak with your cabling contractors in their language!

Learn more ...

Please rate this page

Rating: Average rating: Ratings
BadFineGoodVery GoodExcellent