Phone Lines

Cabling-Design.com FREE cabling and networking Helpdesk
icon
 Question by Johnny Goni posted 14 Jun 2005
 Phone Lines
I have Comcast Cable and Vonage @ my house. Also in my basement i have a RTM1475 box that allow me to connect 12 lines at the same time. My problem is know how to bring a phone line from the VONAGE box to the RTM1475 if one end has to be rj11 and for the RTM1475 has to be rj45. Thanks
icon
 Answer by Joseph Golan posted 24 Jun 2005
Dear Johnny,
RJ11 plugs should fit and properly center in the RJ45 jacks of the box, Use RJ11s for both ends.

Sincerely,
Joseph Golan, RCDD

Click here to see the expert's profile
Back to the current page of questions | Back to all the questions
Back to Cabling-Design.com HELPDESK | Ask your question
Residential Cabling Guide

Home Cabling Guide

Finally, an instantly downloadable book that saves you thousands in home improvement dollars! Enjoy living in 21st century technology-advanced home while increasing its selling value and competitive advantage on the real estate market. Whether your cabling is for home office or high-tech leisure, you can wire your home yourself or learn "wirish" to speak with your cabling contractors in their language!

Learn more ...

Please rate this page

Rating: Average rating: Ratings
BadFineGoodVery GoodExcellent