SBC Interface

Cabling-Design.com FREE cabling and networking Helpdesk

	Question by Jesse Morales posted 10 Jun 2005
	SBC Interface
I have wired both a phone line and data line at the user end 568b but I am not sure about the sbc interface there are a red screw, green screw, black screw and yellow screw this is a new store and I am doing these two lines myself thanks for your help.
	Answer by Joseph Golan posted 24 Jun 2005
Dear Jesse, Typically Green & red make up the first pair and Black & Yellow are the second. If you are hooking up 2 analog lines to the voice cable to work in a single line telephone then you are better off with T568A for the voice jack which will align the pairs properly for a 2-line operation. Sincerely, Joseph Golan, RCDD
Click here to see the expert's profile

Back to the current page of questions | Back to all the questions

Back to Cabling-Design.com HELPDESK | Ask your question