regarding peer to peer network color coading

Cabling-Design.com FREE cabling and networking Helpdesk
icon
 Question by vijay basker posted 17 Nov 2004
 regarding peer to peer network color coading
Dear all
i need color coading to connect a peer to peer network and streight through cabling.
i hope ur kind help
thank you
vijay
icon
 Answer by Dmitri Abaimov posted 17 Nov 2004
Dear Vijay,

please visit this page: http://www.cabling-design.com/references/pinouts/t568ab.shtml . If you use T568A pinout on one side and T568B on the other side, it will be the Ethernet crossover cord that you need for peer-to-peer connection. If you use the same pinouts (T568A or T568B) on both ends, it will be a straight-through cable.

Sincerely,
Dmitri Abaimov, RCDD

Click here to see the expert's profile
Back to the current page of questions | Back to all the questions
Back to Cabling-Design.com HELPDESK | Ask your question
Residential Cabling Guide

Home Cabling Guide

Finally, an instantly downloadable book that saves you thousands in home improvement dollars! Enjoy living in 21st century technology-advanced home while increasing its selling value and competitive advantage on the real estate market. Whether your cabling is for home office or high-tech leisure, you can wire your home yourself or learn "wirish" to speak with your cabling contractors in their language!

Learn more ...

Please rate this page

Rating: Average rating: Ratings
BadFineGoodVery GoodExcellent